I could use a couple sets

I could use 3-4 sets, email me jainbaby@aol.com

I'll go ahead and order another 10 sets tomorrow so you guys get what you need. It'll be a week or so before they get in.

Keep It Warm and another guy have my last three already spoken for.....unless they change their mind.

Trey

Thanks for remembering me Trey! Yes, I would like just one set please. I sent you an instant message already.

Tom

KIW only needed one set (Thanks again!), that leaves two sets left. Jainbaby and akcude, wanna split my last two and I'll order up some more?

PM me if you are interested and I'll give you my paypal info.

Thanks.

These are old-school style bolts that fit the newer Proline cranks? If so... two sets needed here!

If Proline can use the old 401 style hardware then yes, it's the same. I've never had Prolines so I wouldn't know for sure.

I'll make the call today to order 10 more sets. Looks like you guys will use them up pretty quick.

Trey

Update:

I finally got to the hardware store last night, on the way home from work, and verified that the 3/8 x 3/4 OD flat washers were the ones that fit.

I faxed in the order this morning (Sat). Not sure if they are open today. I had them send it to one of my offices that was very close to them, then I can have it inter-officed back to my office. Hopefully that'll speed up delivery so I can get these to you guys a lil faster.

I'll post back as soon as everything comes in and send out your set KIW.

Thanks,

Trey

No prob Trey and thanks again

Update:

They were open today and had everything in stock. It ships on Monday the 14th.

I could use a set if you have one left.

ME TOO!!!!

Update:

Good news: Parts came in.

Bad news: They shipped the same 3/8 x 13/16 flat washers. So now I have 10 extra.

I called and they said that was all they had. The next size down was 3/8 x 5/8 and that is too small.

The washers are .36 each so I'll knock off $1 to make it right. You can go to your local Ace Hardware and get the washers you need. They have a Chrome nuts and bolts section.

Good news is that all the other parts are perfect.

I have 13 sets total and 13 are "spoken" for.

Keep It Warm - 1 PAID
Jainbaby - 3
Akcuda - 2 PAID
BrianP - 1 PAID
cw - 1 (maybe)
85trickstar - 1
oldschoolpk - 1
rick kast - 3


Paypal me $10 if you are east of the Mississippi and $11 if you are west of it.

My acct is trey.sullivan@gmail.com

If someone bails I'll update the list above.

Thanks again for your patience.

[ August 18, 2006, 03:57 PM: Message edited by: TreyS ]

Teaser pic:

YUMMY!!!!!!

Paypal is sent Trey!!!

thank you very much!!!

Jon

If you have any left. Please let me know. Thanks
Glenn

I'm interested too if you have a set.

Keep It Warm - 1 PAID
Akcuda - 2 PAID
BrianP - 1 PAID

cw - 1 Pending
85trickstar - 1 Pending
oldschoolpk - 1 Pending

Jainbaby - 3
rick kast - 3

just got back from canada. money on the way
thanks for waiting.

Im interested also .. Lemme Know if you have any left.
Thanks
Tony

No problem Rick, thanks!

I'll add you other three guys down incase someone bails but it looks like they are spoken for at the moment.

Keep It Warm - 1 - PAID
Akcuda - 2 - PAID
BrianP - 1 - PAID
rick kast - 3 - PAID

cw - 1 - Pending
85trickstar - 1 - Pending
oldschoolpk - 1 - Pending

Jainbaby - 3 - ???

For the ones with PAID, I'll ship out Monday. I couldn't get by the Post office today.

Thanks again!!

[ August 19, 2006, 04:17 PM: Message edited by: TreyS ]

Thanks Trey....look forward to getting them.

Hope I can help you in return one day.

Tom

trey,
sorry man, my payment was unclaimed so i cancelled it. check your paypal, it should be in there now.

My fault Chris, I sent the wrong email.

Update:

I went to ship these this morning and I had the wrong envelope. I bought new ones today and everything will be dropped of in the morning. Sorry for the delay, It's my first time doing this sort of thing.

Keep It Warm - 1 - PAID - Ships 8/22
Akcuda - 2 - PAID - Ships 8/22
BrianP - 1 - PAID - Ships 8/22
rick kast - 3 - PAID - Ships 8/22
cw - 1 - PAID - Ships 8/22

85trickstar - 1 - Pending
oldschoolpk - 1 - Pending

Jainbaby - 3 - ??? - (message unread)

PM Sent.

Thanks Steven!

Update:

Keep It Warm - 1 - PAID - Shipped
Akcuda - 2 - PAID - Shipped
BrianP - 1 - PAID - Shipped
rick kast - 3 - PAID - Shipped
cw - 1 - PAID - Shipped

Jainbaby - 3 - PAID - Ships 8/23
oldschoolpk - 1 - PAID - Ships 8/23

85trickstar - 1 - Pending (MO Sent)


!!SOLD OUT!!

Thanks again guys!!

Trey

[ August 22, 2006, 09:53 AM: Message edited by: TreyS ]

Where did you get them? Are you getting more? I was going to go to the local industrial supply store and get some stainless button heads, and allen head, but I'd rather have the chrome.

To be honest you can go to your local ACE Hardware and they have a chrome hardware section. It's on the nuts and bolts isle. I found this out after starting all this.

I got my stuff from a motorcycle place in AZ that Keep It Warm referred me to, Chrome Hardware Supply. You have to buy in sets of 10 pieces.

You will pay more at the ACE place but you can get one set, which is nice. There is also a thread here called redline hardware and it has a place online that you can order from. It costs more as well but again, you can order one set at a time.


UPDATE:

Keep It Warm - 1 - PAID - Shipped
Akcuda - 2 - PAID - Shipped
BrianP - 1 - PAID - Shipped
rick kast - 3 - PAID - Shipped
cw - 1 - PAID - Shipped
Jainbaby - 3 - PAID - Shipped
oldschoolpk - 1 - PAID - Shipped


85trickstar - 1 - Pending (waiting for Money Order)

If you decide to do another purchase, I'm down for a set or two.

I won't be buying any more.

If you need a set, check out this thread:

http://www.vintagebmx.com/cgi-bin/ultimate...ic;f=4;t=005236


.

[ August 24, 2006, 11:25 AM: Message edited by: TreyS ]

lookin good, tks trey