we are now offering a frame/fork repair service, all work is carried out to a perfect standard. give me an email if you need anything repaired, steel and alluminium we do it all. you would be suprised what we can repair
this dp freestyler was twisted and needed a full new seat tube.

graeme

what about a very rusty trickstar i have .i post some pic`s tommorrow

here it is a wall hanger only

this seat tube has been renewed, i should of taken before pics, it was a bad frame
paul if you want that trickstar repaired then send it to us, you have my phone number
graeme

Hi there,

I have a Redline PL20 that needs a few dents repaired. It also needs the paint removing and powdercoated white. Can you help?

Neil

yeah sure can, send me some pics by email and we can sort this out
graeme

Are you located in England ?

yeah north east england, near newcastle
graeme

What are your prices?

all work will be pride according to work needing done, cant have a set price list as we wont know exactly what each job may need
email me at a.robley@btinternet.com for any assistance
graeme

Good to see there's a place to fix frames on our side of the pond! - just a shame none of mine have broken (yet!)
This post will probably get the attn of uk bmx guys - so here goes with a request - I need a lhs locknut which holds the coaster arm on, on my NOS lester mag - I think the coaster is a bendix 76??
(that's the arm that is on it anyway!)
The axle from a skyway tuuf 2 fitted ok (I needed a longer axle) - so that's the same thread - but the nut need to be big enough to cover the coaster arm - to hold it on.
I need one of these desperately - like before next weekend! - I will pay cash or swap parts - can anybody help??????
email me at keyzkev @hotmail.com (lose the gap)
if you can help!
ps -I also have a nos front lester mag in yellow if anyone is interested??

Dude, that is easy, just go to a local engineers suplier and they will hook you up.

Oh, and G's repairs are amazing, I saw what he did to a GT Performer, I may be able to get some before and after pics for you G if you want??

ORB

yeah orb if you have before and after pics of the performer post them here
thanks bud
graeme

Graeme - I have sent you some pics of my PL20 - can you respond with a price for me - thanks.

hey subwax, sorry i cant respond until mick (frame repairer) is back from holiday. is it possible that you could send clearer pics of the frame, either its my screen or your cam but its difficult to make out the damaged areas properly.
graeme

The problem is that the frame is white, and the damage is hard to see - I'll try again, but its not going to be very clear, i'm afraid.

hey sub, if its paint then strip some paint away with nitromorse. that would help a lot, should be able to get a price sorted over the weekend for you. is this bike gonna be a rider or a display bike??
graeme

G, I have not given up, I know I have pics of the Blue that you made yellow, I just have to find them.....

I will let you know dude..

Strangely, Nitromors will not remove the first coat of paint. It removed everythnig else, but would not shift it.

This bike will be a display bike. I am unsure at the moment as to whether to build it as a PL20, white, or a 1st generation Carrera, which is chrome.

hey sub, mick is back today, i will show him the pics asap and get you a price
graeme

Thanks Graeme. I have heard good things about your services so am looking forward to sending my frame to you.

hey sub, how bout you send your frame to us, we can look at it here to qoute a price (much easier than pics) if you decide not to use us i will send it back free of charge.
gimme a pm if thats ok for you
graeme

hey bil whats that meant to mean, please dont try and imply something here
graeme

Errr - hope I havent caused offense by asking Graeme to help me restore my frame.

You cant cause offence, its up to you and G you will always get some tool whos bored and wants to try and make something out of nothing.

Andy

Thats service as far as i am concerned big up graeme "dont wanna use us i will ship it back free"
Hell I might snap a frame just to give it a holiday

Graeme what about removing a rusted in stem , I have tried and failed , but a good metal worker should be able to shift it?

Rich

yeah rich we will be able to do that, tell you what mate, send it to us for a quote and if you dont like the qoute i will ship back to you for free.
subwax you didnt cause any offence at all, my offer to return the frame to you for free if you dont use our repair service is a legitimate one. most the guys here know me and can give you there oppinions on my honesty, give some of the uk guys a pm before you send the frame and check me out
graeme

Subwax, no need to fret, that post by Bill Goode is just pants! He didn't even make a comment.

He's also recently 'put his foot in it' in the vintage freestyle 'room'.

I'm just about to send Graeme a f&f and some other bits to be powder coated and I know he's done the same for others with chrome plating.

By the way - whats the turnaround time for a rechrome?

thats a million dollar question, quickest i have had so far was 12 weeks i think. the haro below was done by my chromer

graeme

[ August 01, 2004, 12:01 PM: Message edited by: graeme ]

Cheers graeme will email ya soon , It can wait till Rom . Subwax no worries mate Graemes a good guy .
Although I reckon he's photo shopped that Haro , nothing can be that shiney LOL
Rich

hey rich, sometimes i wish it wasnt as shiny, costing me a fortune in sunglasses
cant wait for rom, gonna be a blast
graeme

Graham is a good lad. I can say no more than that he is honest, fair and he knows his stuff..


ORB

hey oli, stop that, people will realise about our relationship.
graeme

[ August 01, 2004, 04:38 PM: Message edited by: graeme ]

our relationship??

Hi Graeme

Im from South Africa, would you be able to help me aswell,

My 1983 Mongoose pro class, the tube running down, cracked

Regards
Corolla

if your prepared to pay the shipping and repair costs i would be delighted to help
graeme

Greame,

Where exactly in the Newcastle area are you??

I,m in South Shields.

Cheers

Simon.

near newcastle,,, consett
graeme