Please vote for your favorite!
Thanks Mike. you rock!!!!
Where do we see the design's they thought up? Or are we just voting for the neatest name if so I like "SACK" I may name my next child SACK! 
http://www.vintagebmx.com/community/index....wtopic=27035152
there is the link until the finalist copy and paste there ideas in here for all to see...
CURRENTLY TAKING BRIBS,LOL
there is the link until the finalist copy and paste there ideas in here for all to see...
CURRENTLY TAKING BRIBS,LOL
*Standard cruiser frame, with a looptail and iron cross etched on dropouts and headtube, and spider web gusset,
Standard logo in the iron crosses, american BB, integrated headset, 21.5 inch top tube, regular standard race cruiser geometry, V brake mounts.
*Standard forks with iron cross cutouts in dropouts
*Chrome 4 piece cruiser bars - 28 in. wide X 5 in. tall
*Black A'me grips
*Polished neck with iron cross logo on top
*Chrome hoops
*Polished Bullseye hubs
*Handmade leather seat with Standard S logo
*Chrome cranks
*Chrome Bullseye pedals
And
Painted like this
Headtube gusset like this:
Red and white old school pinstriping here and there, "Standard Chongo Blanco" on downtube
Standard logo in the iron crosses, american BB, integrated headset, 21.5 inch top tube, regular standard race cruiser geometry, V brake mounts.
*Standard forks with iron cross cutouts in dropouts
*Chrome 4 piece cruiser bars - 28 in. wide X 5 in. tall
*Black A'me grips
*Polished neck with iron cross logo on top
*Chrome hoops
*Polished Bullseye hubs
*Handmade leather seat with Standard S logo
*Chrome cranks
*Chrome Bullseye pedals
And
Painted like this
Headtube gusset like this:
Red and white old school pinstriping here and there, "Standard Chongo Blanco" on downtube
REMEMBER THIS IS FRAME ONLY CONTEST!
where are lonewolfs designs??!!!
we need lots of votes!
I voted for Scottbronxton. It was close between his and SACk's because they were both bikes that _I_ would ride/race. Which is what was the final determining factor for my vote.
I'd like to write in a vote for superjeer's design. It's the best and it should be done and shipped out ASAP!
I'd like to write in a vote for superjeer's design. It's the best and it should be done and shipped out ASAP!
A chromed out Thruster Tri-Bar 26" with that wicked rear end.
22" Top Tube.
Euro Bottom Bracket
Angled for racing. Oh yeah, I'm dumb enough to put this baby on the track!
Short rear tri.
V-brakes
SBC stamped in the dropouts and faux brake bridge
Short BB height. (Long seat tube, I think.) I need a lot of leg room.
Did I mention all chromed out?
Plus, 1.5 hole chrome forks to go with this awesome frame-SBC stamped, of course.
Can anyone say "Rockford 2010?"
I'll try to post drawings later tonight but you get the idea. I already have several unassembled retro cruiser parts and, of course, a head full of ideas to complete this project!
22" Top Tube.
Euro Bottom Bracket
Angled for racing. Oh yeah, I'm dumb enough to put this baby on the track!
Short rear tri.
V-brakes
SBC stamped in the dropouts and faux brake bridge
Short BB height. (Long seat tube, I think.) I need a lot of leg room.
Did I mention all chromed out?
Plus, 1.5 hole chrome forks to go with this awesome frame-SBC stamped, of course.
Can anyone say "Rockford 2010?"
I'll try to post drawings later tonight but you get the idea. I already have several unassembled retro cruiser parts and, of course, a head full of ideas to complete this project!
QUOTE (superjeer @ Oct 9 2009, 10:05 AM) 
I voted for Scottbronxton. It was close between his and SACk's because they were both bikes that _I_ would ride/race. Which is what was the final determining factor for my vote.
I'd like to write in a vote for superjeer's design. It's the best and it should be done and shipped out ASAP!
I'd like to write in a vote for superjeer's design. It's the best and it should be done and shipped out ASAP!
Cheers, thats made my day, thanks.
just to remind allof my idea -
My dream O/S influenced ride would be a Hutch backend(with smaller thicker dropouts) with a 250s (copied 250 angles + tubes - no need to re-invent the wheel) frontend 21" toptube - or maybe 21.5". Mid BB + int headset
Mostly for trails & parks - guess you could do a lighter version for race.
QUOTE (nvmyslowride @ Oct 8 2009, 09:47 PM)
REMEMBER THIS IS FRAME ONLY CONTEST!
Oh, I'll be ordering a set of custom matching forks.
BOO YYAAWWW!!
VOTE FOR PEDRO, HE HAS SKILLS
Very seriously- Congratulations to the finalists.
IT WAS TOUGH TO CHOOSE, BUT..........
Winning design was chosen based on originality, the design’s feasibility to go from sketch to steel, and the production CAPABILITIES of Standard Byke Co.'s shop... CAD was not needed, but very cool to see.. and since this is VINTAGEBMX it was neat to pick some Vintage inspired bikes.....
Nick
Winning design was chosen based on originality, the design’s feasibility to go from sketch to steel, and the production CAPABILITIES of Standard Byke Co.'s shop... CAD was not needed, but very cool to see.. and since this is VINTAGEBMX it was neat to pick some Vintage inspired bikes.....
Nick
Guess I need to start campaigning. 
QUOTE (sack @ Oct 9 2009, 02:51 PM)
Guess I need to start campaigning.
bribes. corruption,
naked pics of ex's? lol
The naked pics are of my ex.
QUOTE (sack @ Oct 9 2009, 03:09 PM)
The naked pics are of my ex.
you got my vote!!! wheres the pics, hahaha
It probably wouldn't help my cause.
lol
we have all had one of them!
we have all had one of them!
But if I win, I promise to be nice from now on. To everybody on here.
Hey guys. Its an honor to be a finalist. Really cool. I saw so many great designs, I didn't think I had a chance. How can I paste my design from the other thread to this one? Thanks.
QUOTE (DanThrift @ Aug 18 2009, 09:21 AM)
My dream frame is a 70's retro inspired, chromoly race frame with new school (125R) geometry. WARNING: If you build my frame, a big fat guy is gonna ride like a rented mule. I see it as a 20" but it could fly as a 24". To me 70's means very big gussetts. I'm thinking like Mongoose Motomag but instead of just a round hole, the Standard "S" logo. American bottom bracket for flat black, one piece (Ashtabula) cranks. I'm not too picky on how the rear triangle is laid out but it's gotta have a coaster brake mount. Old fashioned type on the chainstay. No v-brake or 990 mounts. I think a plate style (caliper) brake bridge with the script "Standard" logo ingraved in it would be really cool. I plan on Tuffs with a coaster brake so the brake bridge is just in case.
You said to "dream big" so here's the big part. Ashtabula style, flat blade fork with 1 1/8 threadless steerer. I don't even know if that's possible, especially for a big guy. If anybody can do it, you guys have got to be it. If the fork doesn't fly a flat black tubular fork will work too.
A good 70's retro color is a glossy pumpkin orange for the frame and flat black for the fork.
That's about it. Thanks for a great opportunity. It's really great to see what everyone else is intersted in.
Thanks, Dan
You said to "dream big" so here's the big part. Ashtabula style, flat blade fork with 1 1/8 threadless steerer. I don't even know if that's possible, especially for a big guy. If anybody can do it, you guys have got to be it. If the fork doesn't fly a flat black tubular fork will work too.
A good 70's retro color is a glossy pumpkin orange for the frame and flat black for the fork.
That's about it. Thanks for a great opportunity. It's really great to see what everyone else is intersted in.
Thanks, Dan
If I win, (It's a longshot, I know.) I'll build it, bring it Rockford and we can all take turns doin' crazy stuff on it. Cool bikes should be ridden and enjoyed by as many as possible.
VOTE IT UP PEOPLE!!!!
Its a tight race
Why isn't Ironhide a finalist? His frame is killer.
VOTING WILL BE OVER AT 9AM CENTRAL TIME...
AND THE WINNER IS.......................
NOT YET STILL HAVE 5 MIN. HAHAHHAHA
NOT YET STILL HAVE 5 MIN. HAHAHHAHA
IT IS 9AM, AS PROMISED. WHEN I PUNCHED IN FROM WORK, THE VOTING WAS CLOSED.
WINNER OF SBC DESIGN CONTEST BY ONLINE VOTING IS........
SACK!!!!!!!!!!!!!!!!!!!!
WINNER OF SBC DESIGN CONTEST BY ONLINE VOTING IS........
SACK!!!!!!!!!!!!!!!!!!!!
flippin sweet
Congrats Sack!
Thank you to all who entered and put in alot of hard work, but it was you and us picked the coolest bike to be made. I will be sure to do a build thread on inside SBC!!!!!!
NICK
NICK
Congratulations, Sack. I know yours will be an awesome build.
I can't wait to see it made! Great times.
Yeah, it'll be pretty cool. Two threads: Frame build and the final assembly. 
Congrats Sack! Should be killer!
Thanks, I am in parts gathering mode right now. Need lots of chrome parts. I will post pics as soon as I start building it up. I'm sure Nick will post pics of the frame build. I really am interested in the powder process for that finish.
Congratulations Sack. Hope to see it in person. Thanks to everybody (SBC, contestants, etc) for a fun contest.
QUOTE (sack @ Oct 12 2009, 02:52 PM)
Thanks, I am in parts gathering mode right now. Need lots of chrome parts. I will post pics as soon as I start building it up. I'm sure Nick will post pics of the frame build. I really am interested in the powder process for that finish.
I AM ALREADY ON POWDER DETAIL, ALSO GOT SOME OTHER METHODS IN THOUGHT FOR A COOL EFFECT!!!!
LAYERS OF RATTLE CAN, LOL J/K
way to go sack !!!!!!!!!!! looking forward to seeing this one built.
Eye, well done to Sack, you must be happy as, haha.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.