When applying rub-on/rub-off decals, what is the best way to do it? I have Landing Gear rub-offs for my Floval and I don't want to mess it up!! Thanks in advance.

For the best results (if you aren't are signwriter) is to get a spray bottle with water in it & squeegee (or credit card).

Here's how you do it...
1.Clean the surface first,
2.Spray a "mist" of water over where the sticker needs to go...not too much though
3. Peel off the sticker backing carefully
4. Position the sticker on the frame/fork...the water will allow you to slide in position without it "sticking down" straight away
5. Get the credit card and squeegee the excess water by rubbing the top of the application tape (top of the sticker), squeeezing the water out from underneath.
6. Let it sit overnight...then when it's dry peel off the application tape...Done!
Hope this helps
Mick

I'll give it a whirl!!! Thanks Mick! Which works better Mastercard or Visa? lol

Hmm...Visa I think?...LOL
Glad to help Mate!

Add a drop of dishwashing liquid to the water, it breaks the surface tension of the water and gives you a more evenly lubricated surface to position the decal. Less chance of getting part of it stuck down too permanently. Won't affect the decal adhesive.