i have a set of non stampted LG forks but they have a small hole on the bottom of each fork. the holes are on the section that has the stamp on (on the stamp version) these look like machined holes in the same place on each fork..i have no pics but they look the real deal and the welds are quality.can anyone shed any light on this...

Hello
If you have any pictures and can't post them
send them to me!! SPINNIN69@aol.com and i will post them 4 u. I have NOS non stamped landing gear on my loop PK...i will take a look and tell ya, but someone will probably answer ya b4 i get home to look.

Jon

Whitt, Are the holes on the inside of the fork leg? If so, that is normal for those forks.

Sounds like the holes are on the bologna cut from the description. If so then they are fakes. If the relief hole is on the inside of the leg at the bottom then they are most likely real.

Hey Brian LG 101

here is the picture....i think they are fakes guys...
like brian said

Jon

pic didn't load all the way. but u see the holes in the bologna cut... sorry greg..u got a fake set...

Jon

Here's what they should look like: http://;17.photobucket.com/albums/b74/SEMark/bmx077.jpg