VINTAGE BMXERS UNITE to help out others! PLEASE READ!, PICS OF KIDS WITH NEW BIKES, UPDATED NOV 11th 2009 check daily for upd Options

[bikerboy2182]

awwww... how sweet

[lh4x4]

I'm the one that left off a batch of rims some with new tires and tubes a week or so ago. I have a ton of parts such as cranks, headsets, bars and bearings for everything.

If you have time send me a email of what you may have use for and I will drop it off. I don't have any frames left.

I didn't want to drop off a big pile of parts that you may not need.

[bikerboy2182]

we have been using just about everything we get. we have enough tires and tubes. we could always use more cranks, sprokets, headsets, threaded stems, gyros and cables, seat posts and clamp and brakes

[nvmyslowride]

Just like lil bro said above.

I could also use a good set or 2 of hubs or complete wheels for a redline project. I also have a dyno I am redoing and could use almost everything for that. I could use a few solid nice sprokets for freestyle bikes 43-44t. I also need nice lite alum ones for race bikes 43-44t.

I am also out of new BB 1 piece cups and bearings. exc.... 16'' tires of white and black,and also looking for 2-3 sets of white tires of any kind for girls bikes...20''

[indylodown]

is the dyno 1 inch or 1 1/8. call me when you get a chance.

[nvmyslowride]

Dyno is a 1''. it is a all redone 96ish nsx flatoval rear bike... with matching forks and stem.

[nvmyslowride]

I just got a nice MCS holeshot expert alum frame. I will be looking for light weight parts to make this complete. May go out for powder, so Color does not really matter.....

[nvmyslowride]

Justin @ Porkchopbmx donated this. I added new Stickers for a modern RACE look. Newer powder from Justin. I cleaned up frame. Still has stock schwinn head badge and Schwinn seat post decal.

Decal's by www.callie-graphics.com Tell callie BMX program Nick sent ya.

1997 Schwinn Super Stock 3
Chromoly main triangle
24"
Takes 1 1/8" theadless forks - American bottom bracket - 3/8" axles
Has a Polished DK 30MM seat post also from Justin.


(IMG:http://i259.photobucket.com/albums/hh304/nvmyslowride/DSC06032.jpg)

(IMG:http://i259.photobucket.com/albums/hh304/nvmyslowride/DSC06033.jpg)

(IMG:http://i259.photobucket.com/albums/hh304/nvmyslowride/DSC06034.jpg)

(IMG:http://i259.photobucket.com/albums/hh304/nvmyslowride/DSC06035.jpg)


Need Parts to finish this bike. Please Help. What ya think justin?

This post has been edited by nvmyslowride: Nov 16 2009, 08:10 PM

[indylodown]

It's a good thing I haven't been to the PO yet cause you keep coming up with bikes I can help out with. I have a set of mini v-brakes for the MCS. Do you want silver or black?, let me know. I can also help out with the forks for the Schwinn. I have matching forks in chrome. I will have to get a bigger box now and I'll try and get it out by the end of the week. This is all stuff I was wanting to sell but I feel better donating it. (IMG:style_emoticons/default/good3.gif)

[nvmyslowride]

It's a good thing I haven't been to the PO yet cause you keep coming up with bikes I can help out with. I have a set of mini v-brakes for the MCS. Do you want silver or black?, let me know. I can also help out with the forks for the Schwinn. I have matching forks in chrome. I will have to get a bigger box now and I'll try and get it out by the end of the week. This is all stuff I was wanting to sell but I feel better donating it. (IMG:style_emoticons/default/good3.gif)

Scott,
anything is cool! beggers cant be choosers! wow forks for schwinn? one less worry!!!

thanks brother!!

[bikerboy2182]

i love u guys. keep it coming. i love building these bikes. theres going to be alot of happy kids

[nvmyslowride]

I just got done working in the garage on referbing some odds and ends. Donation funds are depleted. Not only has it bought a bike, but many many parts for all bikes high end and low end. I am still in need of parts and $$$$$$ the most as for Im paying out of my own pocket and running a Program tab (small) at Goodtimes. This buys odds and ends from brake kits, misc., head sets exc.. Now I am desperate for GOOD complete wheels.

Even if it is a $2.00 donation through paypal, whatever it helps pay the bills and keeps it going. If you send it as a personal gift, it gives me 100% and dont take fees. Id like to buy some parts from the other bike shop in town as I want to support all I can. But with zero funds it makes it hard. Alot of people are down on there luck right now without a job, Understandable and dont hold it against anyone, I worry day to day. But the ones who can spare a few bucks, send it on over. Once more people see pics of kids getting bikes it makes it worth it...


ALSO.. I NEED HELP FINDING KIDS. LEGIT. Please have your track directers email or call me or if you may know a kid, give me his story and age, exc.. and lets send more bikes out!!!!!

PAYPAL - a100dork3@yahoo.com


Should have more pics of another completed bike tommorrow if my cranks get here!

This post has been edited by nvmyslowride: Nov 17 2009, 07:08 PM

[nvmyslowride]

I am building a bike for our local BMX track for a kids loner bike program. This way many kids can enjoy the bike. I am donation a hyper NOS hornet F/F seat clamp from MRsmith, IRC tires, handlebars from Porkchopbmx, Grips, lever, cable, from UNI and a UNI seat. This way not Just 1 kid will enjoy it, but many kids.. to me that is important it will get alot of use from kids who dont have a bike of there own. and Loner bikes are by donations only. it wont be 100% complete, but the bike shop will finish the rest..

http://www.embmx.com/

[nvmyslowride]

I am in need of a hub asap. I need a BLACK 48 SPOKE 14MM rear. dont have to be cass. I have 3 new fronts i could unlace and swap in a rear hub. I really need a black odyssey hazard hub..

[nvmyslowride]

i am building a retro redline for my giveaway. I could really use a set of New shiny 1 piece cranks as much as id like to run some flights, not in the budget. I could also use a like new red plastic seat like a SE blitz. I want to keep it all redline or as close as i can, so i could use a 7/8 straight post and seat clamp. It is a older frame from the 80's that we added V brakes on to update it. It will have V bars and new MXii decals. I could also use a Very Nice set of repop red pedals for 1 piece cranks.......

I also have a new V bar NOS pad, and could use just a normal top bar straight one. it can even be blank..

If anyone has anything like this, I should be building this bike in the next few weeks when it all comes back from powder...


Thanks

Nick

This post has been edited by nvmyslowride: Nov 18 2009, 11:14 PM

[nvmyslowride]

Project Spare Part Redline.

Frame given to us by BMX racing zone In East Moline
Repainted burnt Orange by my brother Jeff Ziegler and AUTO cleared.
Repop old style decals from Seattlebikesupply -Gork
Stem is a hoffman from my brother and Hoffman tires / pedals
Sunday fork / 14mm Hazzard front wheel / pegs donated from odysesy
FSA headset from INDY
Brake cable from UNI
3 piece chromo cranks from PorkchopBMX with redline decals from Seattlebikesupply. Chain from Porkchop
Grips, bars, Lever, seat from DK
Salt 14mm rear wheel from DK
Rear brake/ sproket from 2HIP


(IMG:http://i259.photobucket.com/albums/hh304/nvmyslowride/DSC06045.jpg)

(IMG:http://i259.photobucket.com/albums/hh304/nvmyslowride/DSC06046.jpg)

(IMG:http://i259.photobucket.com/albums/hh304/nvmyslowride/DSC06047.jpg)

(IMG:http://i259.photobucket.com/albums/hh304/nvmyslowride/DSC06048.jpg)

(IMG:http://i259.photobucket.com/albums/hh304/nvmyslowride/DSC06055.jpg)

(IMG:http://i259.photobucket.com/albums/hh304/nvmyslowride/DSC06049.jpg)

(IMG:http://i259.photobucket.com/albums/hh304/nvmyslowride/DSC06050.jpg)

(IMG:http://i259.photobucket.com/albums/hh304/nvmyslowride/DSC06054.jpg)

(IMG:http://i259.photobucket.com/albums/hh304/nvmyslowride/DSC06053.jpg)

This post has been edited by nvmyslowride: Yesterday, 10:09 PM

[dan restro]

the new rides are looking dialled nick,very nice for some lucky kid (IMG:style_emoticons/default/sun_bespectacled.gif)

[nvmyslowride]

We could go alot faster, but it is 2-3 people building. And I like stuff to match and be built right, strong and dialed as close as we can..all bikes will need to be tweeked when they arrive and fit for the kid, but they should be close.

May take the redline to the skate park tommorrow!! Have to test it out

This post has been edited by nvmyslowride: Today, 01:20 PM

[Brandon002]

Nick, you give that hyper away yet? I might have a kid that's local over here that would deserve it. From a lower income family that really wants to give a shot at racing. He's one of my nephew's friends and he's a big kid for a 13 year old. That bike would probably fit him perfectly. Let me know what info you'd need for him to be considered.

[nvmyslowride]

Nick, you give that hyper away yet? I might have a kid that's local over here that would deserve it. From a lower income family that really wants to give a shot at racing. He's one of my nephew's friends and he's a big kid for a 13 year old. That bike would probably fit him perfectly. Let me know what info you'd need for him to be considered.

PM SENT, still have it. (IMG:style_emoticons/default/good2.gif) I also take bribes and payoff's!!!! J/K, maybe

This post has been edited by nvmyslowride: Today, 02:26 PM